Quantcast
[ 3 / biz / cgl / ck / diy / fa / g / ic / jp / lit / sci / tg / vr ] [ index / top / reports / report a bug ] [ 4plebs / archived.moe / rbt ]

Maintenance is complete! We got more disk space.
Become a Patron!

/tg/ - Traditional Games


View post   

[ Toggle deleted replies ]
>> No.41158488

So I was fishing around for ideas to model a Necromunda gang on, and settled on the Warboys from Mad Max, only problem is the only models I can think of that would work decently are Digganob Diggas, and they're pretty damn hard to get a hold of nowadays.. I could use Necromunda goliaths, but they're more fitting of the guys from Road Warrior.
Anyone got any good ideas for alternate models?

>> No.41158553
File: 141 KB, 800x610, DSC02757.jpg [View same] [iqdb] [saucenao] [google] [report]
41158553

muh progress

>> No.41158621

>>41158488
All the bare-chested models I can think of a big guys, not skinny like the warboys.

>> No.41158637

>>41158621
Yeah, that's the main problem, need to find something not in Heroic scale.

>> No.41158738

>>41158637
Ooh I thought of something, you want Roman era barbarians, Celts and Germans.

>> No.41158751
File: 74 KB, 800x600, braceyourselves.jpg [View same] [iqdb] [saucenao] [google] [report]
41158751

>>41158488
Brace yourself, I've been thinking about this too lately!
>and settled on the Warboys from Mad Max
Good!
>only models I can think of that would work decently are Digganob Diggas
Bad!
As a matter of fact I have a box of them here and I don't think they'd make good stand ins. Unless you want to move away from the movie flavor and add more 'GW-style' elements.
>I could use Necromunda goliaths, but they're more fitting of the guys from Road Warrior.
Goliath are basically competition bodybuilders not even strong men in terms of looks, while the warboys are starved teens/young men plagued by sickness. You need something less beefy
>Anyone got any good ideas for alternate models?
A few.
Okay first of all you need to source some good half naked models. You need to think about scale here. You'll need yoofs and adults.
You can get some pretty good celtic warriors (lots of hair and beards though but plastic) and woodland indians (meteal) from warlord games. The celts will likely require a headswap. The indians an new pair of trousers or a swap for the lower legs.
Warlord is slightly smaller heroic scale than GW, which should make them perfect candidates for swapping their lower bodies with popular aftermarket products for IG. I had my eye on Victoria Miniatures, because they are close to the old Perry models in scale, i.e. a smidge smaller too.

Now the youths could be done by combining true scale models. The Perry's have some plastic Indians as well, though the plastic Madhist box will likely give you better value for money. Wargames Factory have Woodland indians too, but they have chiseled abs. Either way, next to heroic models they'll look lanky so they'll probably be perfect if you can make them a little shorter.

Aside from that you just need a little GS to add a piece of cloth around their neck of face maybe. You can get googles (against sand) from Victoria Miniatures as well, which can be added to any mini.

Hope that helps.

>> No.41158789

>>41158751
>>41158738
Awesome, thanks guys, completely skipped over historical models, just need to get some good legs and a couple bags of guns and I'm set.

>> No.41158824

>>41158751
>The Perry's have some plastic Indians as well
Meant metal, sorry.

Oh and of course you could have a look at all the post apoc minis around.
Eden by Taban (recently changed the owner though)
Punkocalypse
Sulphur
The fallout models from Brother Vinnie
The post apoc/survivor models from Foundry

>> No.41158859
File: 95 KB, 650x647, spray.jpg [View same] [iqdb] [saucenao] [google] [report]
41158859

>>41158751
Hold still, I shall prepare you for Valhalla!

>> No.41158905

>>41158488
Some really good ideas have been posted already, I would suggest that you could also kitbash some chaos marauders with catachans and or cadians for some.bare chested dudes with guns and axes etc.

>> No.41158916
File: 264 KB, 400x166, I live, I die, I live again!.gif [View same] [iqdb] [saucenao] [google] [report]
41158916

>>41158859

>> No.41158931

Okay, about to try and adjust an Ork leg so one leg is extending straight down. Just to double check, I should cut at the hip and the knee, pin it all, then GS over it right?

>> No.41158963

>>41158905
THought about that, but they're way too bulky, though they'd make great Road Warrior dudes.

>> No.41158979

Anyone got pictures of elder painted metal with washes in all the crevices instead of edge highlights?

>> No.41159018

>>41158931
Yes.

What are you pinning with? Something more flexible will make your life so much easier.

>> No.41159060

What in shit should I be using for the lighter highlights on a Khrone Daemon Prince, or any Khornate daemon for that matter

Base (Khorne Red) > Wash (Carroburg Crimson + Nuln Oil mixed on model) > first highlight (Khorne Red)

That's where I'm up to and I tried Mephiston Red next but it seems to stand out too much. Have I maybe just done the lines too thick?

>> No.41159089

>>41159018
Well, with nothing better at hand, I'm using paper clips. I could probably get better pins at Homedepot or something, but I'm kind of strapped for cash and can't really afford extra stuff.

>> No.41159159

>>41159089
Paper clips are pretty good actually, you want something you can bend to get the pose just right.

>> No.41159189

>>41159060
Mix some orange into the Khorne Red.

>> No.41159200

>>41158751
So after having a look around, I'm thinking taking some Wargames Factory Celtic Warriors, which come with a fair few nice and neat shirtless upper bodies, penal legion legs (the chains and shackles could make a nice tough), bald heads and goggles from Victoria miniatures, and already got a big back of guns and close combat weapons and stuff from some other group.
Will just need a spot of greenstuff in the join, and providing the legs aren't too massive, they should look good.

>> No.41159271

>>41159060
I usually highlight khorne red with wazdakka red personally

>> No.41159301

>>41159200
>penal legion legs
The best thing is one in five comes bootless.
Nux conversions inbound!

Pretty much the same conclusions I reached in the end.
Good luck, brother!

>> No.41159323

>>41159301
And to you brother, may you ride, shiny and chrome eternal.

I will be sure to post results when I get some finished.

>> No.41159386
File: 2.94 MB, 3264x2448, IMG-20150711-WA0014.jpg [View same] [iqdb] [saucenao] [google] [report]
41159386

Any tips on how to proceed? Obviously I need to paint the cm ander guy. But camo wise it looks good right?

>> No.41159463

>>41159386
It's just me, but I'd say put a really thin brown wash over the whole of the camo, should help to tie it together and smooth the transition between colors, and after that, you just take the original colors and paint them back over leaving a little around the edges.

>> No.41159570

>>41159463
It's not just you, I was just thinking this before I saw your post. emphasis on really thin though....

>> No.41159608
File: 129 KB, 432x580, IMG_1421.jpg [View same] [iqdb] [saucenao] [google] [report]
41159608

Victor. Armless, but far from harmless.

>> No.41159633
File: 2.10 MB, 3264x2448, 14366482976491300435466.jpg [View same] [iqdb] [saucenao] [google] [report]
41159633

>>41159463
Thanks I tried that before and I didn't like the effect.. it increases realism but makes it too blend for tabletop where it is nice to have highly visible units. Also did u get that tip from the ss paint set?

>> No.41159671
File: 478 KB, 1920x960, 1436629156500.jpg [View same] [iqdb] [saucenao] [google] [report]
41159671

About what size should my magnets be to just magnetize the arms on these guys? I was thinking of buying a bunch of 5mm disk magnets, but I am afraid that those might be too big.

>> No.41159672

>>41159633
Nah, it's just what I'd do, but like, really thin, and you put the original back on, and if they look too bland you can always put a tiny bit of white in the colors, then paint so on in a slightly smaller area again.

>> No.41159689

>>41159633
Isn't blending in with the surrounding terrain the precise point of camo?

>> No.41159706

>>41159386
Dots could be a bit smaller. Pattern is great.
For the commander, paint the uniform first then tackle the hands and head.

>> No.41159730

>>41159671
5mm is going to be much too big, go as small as you can imo.

>> No.41159741
File: 155 KB, 1332x381, Northstar Miniatures Frostgrave size comparison Perry's Sudanese, Gripping Beast Dark Age Warrior, Frostgrave Soldier, GW Lord of the Rings, Frostgrave Soldier, Fireforge plastic, Frostgrave metal thief..jpg [View same] [iqdb] [saucenao] [google] [report]
41159741

>>41159671
5mm is gonna be too big probably. 3mm could work though.

>> No.41159807

>>41159689
In real life.. yes.. on the table top not so much. But I will seriously consider it and see if I can jewtube some tutorials because really thinned down is not exact enough and I don't want to experiment.

>>41159706
Thanks.. will keep that in mind for future vehicles. Real life patern was small stripes but dots are easy to do with a toothpick.

Also thanks for the commander tip!

>> No.41159808

>>41159730
>>41159741
Thanks, I found some 2mm ones for cheap so I will grab a set of those and put my pin vice to work.

>> No.41159868

>>41159807
For an idea of thin, if you've got GW paints, you'd take your Agrax Earthshade, dip your mid sized brush in it, and wipe it all off on a palette, then clean your brush, dip it in water enough that it'll drip and make about 3 drops of water mix with the wash, and that's around right, or if you've only got brown paint, dip like the bottom 3mm of your brush in, wipe it off on the palette, and do the same but with 4 drops of water.

>> No.41159879

>>41159808
sounds perfect.

>> No.41160046

I've asked about it in the other thread, about no one could help me as it seems. So I'll ask here. Where other than on eBay I could get some Diaz daemonettes (same thing goes for old slaanesh lord on a daemonic mount). I don't care if they would be recasts if there are any - Mr. Zan doesn't have them.

>> No.41160136
File: 2.45 MB, 3120x4160, IMG_20150711_221625.jpg [View same] [iqdb] [saucenao] [google] [report]
41160136

Finished a mierce Talos colossus of bronze for a friend. Really nice models to paint. Would recommend!

>> No.41160183
File: 37 KB, 600x620, 99110108053_PenitentEngineNEW02.jpg [View same] [iqdb] [saucenao] [google] [report]
41160183

Have any of you got any tips or even guides on how to paint rusty metal like pic related? I normally use Jew's Workshit paints but I'm prepared to use others.

>> No.41160262

>>41160136
Valar morghulis

>> No.41160280

>>41160136
Go to sleep faggot
I like those eyes

>> No.41160353

>>41160183
there are plenty of rust pigments, GW have Typhus Corrosion + Ryza Rust combo that looks decent.

>> No.41160355

>>41160136
I love what you've done, what paint did you use for the bronze?

>> No.41160356

>>41160046
You could try bartertown or something like that.
Funny enough I'm still registered in one of those Yahoo groups for Inqusitor parts. Every so often somebody actually uses the thing.

Tbh ebay is your best bet though.
If you just like the models better than the current ones and are not adamant about it being exactly those, you could check out the Raging Heroes models. They have a bunch of 'Mantis Warriors' or something like that, that look basically like they remade them in resin.

>> No.41160381
File: 120 KB, 334x1451, ogre rust.jpg [View same] [iqdb] [saucenao] [google] [report]
41160381

>>41160183
That just looks like brown drybrushed with orange to me tbh.

>> No.41160396

>>41160183
You can use Typhus Corrosion and Ryza Rust. I recently bought some weathering pigments from Secret Weapon Miniatures, which can be used for some really nice rust effects. Theres also http://shop.modernmasters.com/c/metal-effects_solutions-and-activators_rust-activator?pkey=49a15cb87acde52374d3c92a089aad94&ckey=81185.81189.81192.0.0 when combined with their iron paint, which will make great rust effects.

>> No.41160432

>>41160396
>>41160381
>>41160353
Awesome, thanks for the advice.

>> No.41160554

>>41159608
hnggg enjoy that mortar. What components did you use apart from the obvious conquest?

>> No.41160760
File: 2.23 MB, 3120x4160, IMG_20150711_221556.jpg [View same] [iqdb] [saucenao] [google] [report]
41160760

>>41160355
Cheers man, it was a piece of piss.

>warplock bronze
>brass scorpion
>brass scorpion mixed with Runfang steel
>wash with agrax earthshade
>repeat step 3

>> No.41160845
File: 3.46 MB, 1632x3508, buddybuggy.jpg [View same] [iqdb] [saucenao] [google] [report]
41160845

Just finished up my new warbuggy with rokkit/shoota options. I got so much stuff converted from that ogre kit. Now I can stop procrastinating and do infantry, maybe.

>> No.41160880

>tfw no motivation to paint today

I mainly don't feel like priming anything and the only things I have primed I don't feel like painting

>> No.41160910

>>41158553
Looks pretty good, the white highlight on the power axe is a little thick though

>> No.41160944
File: 1.88 MB, 2000x1213, Tsons20.jpg [View same] [iqdb] [saucenao] [google] [report]
41160944

Progress on my rubics.

Getting pretty tired of painting them and i'm not looking towards doing all that wet blending on their armour, so i'm going to take a break for now.

Can't really decide what to do next, though.

>> No.41161018
File: 2.74 MB, 3534x1109, zerkers08.jpg [View same] [iqdb] [saucenao] [google] [report]
41161018

>>41160944
On one hand i still have these Zerkers lying around, got tired of painting them about three month ago, painting all that white is suffering.

>> No.41161075
File: 209 KB, 400x614, Warhound_scheme.jpg [View same] [iqdb] [saucenao] [google] [report]
41161075

>>41161018
>painting all that white is suffering.
Please look at the War Hound paint scheme. This was before Angron. All of that suffering you went through? Angron caused it because he thought reversed color schemes were a good idea.

>> No.41161179
File: 1.67 MB, 3036x1768, Dguard01.jpg [View same] [iqdb] [saucenao] [google] [report]
41161179

>>41160944
>>41161018
Also i painted these apostates of contagion like five years ago and never got around to finish them. Thought of giving them another spin.

>> No.41161244
File: 2.71 MB, 2160x2384, nobs01.jpg [View same] [iqdb] [saucenao] [google] [report]
41161244

>>41160944
>>41161018
>>41161179
And finally i could still paint up something not csm related like the 3000p of bad moons i have in a closet somewhere. Ork pictured is one of perhaps 200 that i got around to finish.

So tell me /tg/, what to do?

>> No.41161715

>>41160554
1:72 scale karl-gerat kit for the mortar. Just assembled the gun itself, then used some random bits and a spriggan faceplate to make the mounting (had to saw off the top of the conquest's body to get it positioned right).
Aside from that, all I used were a couple spriggan grenade tubes and a random bit from the karl kit to modify the head.

>> No.41161741
File: 125 KB, 500x318, 5464165431354.jpg [View same] [iqdb] [saucenao] [google] [report]
41161741

i just bought this kit online. Any fa/tg/uys have any experience converting it to 40k earth shaker field gun?

>> No.41161880

>>41160845
I thought you died.

>> No.41161996
File: 812 KB, 1757x2193, frowny_face.jpg [View same] [iqdb] [saucenao] [google] [report]
41161996

I swear my fine motor control has become worse over the past few months

also I hope there is a place where I can buy isopropyl alcohol in gallon jugs

though I suspect I could paint this marine a hundred times and it'd still look shit

>> No.41162115

>>41161996
Just put a few more coats on, I can see through that paint

>> No.41162139

>>41160845
Aww yiss, Snakebite anon. Love it as always, though the bomb and the shells seem to have visible mold/join lines. Dreadlocks crack me up. Building Gorkamorka mobs now, using savages as one of the kits and they are quite fun to convert into 40k or as a bits source.

>> No.41162154

>>41161996
Brutal honesty, yeah it probably would. Fine motor control isn't necessary to not do such a shit job of bits like the shoulders

>> No.41162402
File: 60 KB, 960x720, goblintown1.jpg [View same] [iqdb] [saucenao] [google] [report]
41162402

>>41161996

Everything that is wrong with this model can be fixed with practise. Nobody is doomed to use shitty models forever. Keep practising bud.

>> No.41162434
File: 227 KB, 1318x624, ENHANCE.jpg [View same] [iqdb] [saucenao] [google] [report]
41162434

So I want to use the Skaven Stormfiends for my 40k chaos army and maybe AoS.

Finally figured that they'd make decent dreadnoughts, but I don't have the models so I can't compare scale. If anyone has the models and could take a picture or just let me know if it'd work with a bit of basing, I'd appreciate it.

Also made pic related and it seems like a good fit, but the fiends pic is slightly tilted as opposed to the dreadnought so it probably skews the comparison

>> No.41162709
File: 3.89 MB, 4128x2322, 1436657470890.jpg [View same] [iqdb] [saucenao] [google] [report]
41162709

Can anyone explain why these little hinge like things are on this stand?

I just bought a heldrake and I don't see the point of them in fact I have to snip them so I can glue it to the base.

>> No.41162712

Fuck, working with GS is hard, as is using it to make anything full body on the damn model without having any good place to hold it. Was working on making a jacket and fill in some spots while reposing the leg. It looked great when I started, but by the time I was finished I had reworked it so much the details I originally made had been blended away and had to be awkwardly re-made. The coat-tails got stretched out when I tried to unstick them from each other, just a big messy deal

>> No.41162769

>>41161244
Fuck, that rough metal effect, is that liquid greenstuff? It looks so good.

>> No.41162824

>>41161244
Buy more minis.

>> No.41162872

>>41161244
Clean up the base, drybrush it with a lighter grey. Looks good though.

>> No.41162957
File: 2.39 MB, 2560x1920, 20150708_220422.jpg [View same] [iqdb] [saucenao] [google] [report]
41162957

If you can manage it, why not take a picture of your entire collection, or at least your most recent projects to show the thread?

>> No.41163022

>>41158553
>>41160910
Personally i really like the way you've done the white outline on the power axe, looks epic.

>> No.41163123
File: 1.16 MB, 2592x1936, IMG_0321[1].jpg [View same] [iqdb] [saucenao] [google] [report]
41163123

>>41162957
Everything I've painted so far is pure unadulterated gash

>> No.41163256
File: 45 KB, 617x378, 1426876676182.jpg [View same] [iqdb] [saucenao] [google] [report]
41163256

>tfw the stuff you ordered arrives on Monday
>Forced away to family home to paint it tommorow
>Staying there for a week

>> No.41163286

>>41163256
You're still painting what's the difference?

>> No.41163353

>>41163286
Well, i'll have to be around other people, and they're people i don't like. Plus i'm getting interrupted in finalizing my magnus opus.

>> No.41163844
File: 445 KB, 1280x720, IMG_20150711_202521.jpg [View same] [iqdb] [saucenao] [google] [report]
41163844

>>41162957
I don't feel like taking 70 models out of my storage, so here are my most recent things

>> No.41163919

>>41161018
how'd you do that rat head

>> No.41163934
File: 482 KB, 1280x720, IMG_20150711_203035.jpg [View same] [iqdb] [saucenao] [google] [report]
41163934

>>41163844
Wow what a shitty pic that was

>> No.41164063

>>41163919
Pretty sure that is supposed to be a wolf and it comes in one of the Space Wolf sets, wolf guard I think but not 100% sure

>> No.41164809
File: 3.04 MB, 5376x3024, IMAG0020.jpg [View same] [iqdb] [saucenao] [google] [report]
41164809

Jus tstarted painting these today, just some extras I had laying around and am trying out a new color scheme, the blue came out a little darker than I would have liked but the bone color has come out pretty much exactly as I had hoped.

>> No.41164852
File: 2.95 MB, 5376x3024, IMAG0021.jpg [View same] [iqdb] [saucenao] [google] [report]
41164852

>>41164809
another shot of the other marine

>> No.41164885
File: 2.66 MB, 5376x3024, IMAG0019.jpg [View same] [iqdb] [saucenao] [google] [report]
41164885

>>41164809
>>41164852
and another

>> No.41166624
File: 1.68 MB, 3264x2448, image.jpg [View same] [iqdb] [saucenao] [google] [report]
41166624

Got about half way through this basilisk when I sliced my finger through the nail eating salami. Guess I'll have to wait a bit to finish it up.

>> No.41166719

>>41166624
That's some sharp salami.

>> No.41166796
File: 12 KB, 236x225, image.jpg [View same] [iqdb] [saucenao] [google] [report]
41166796

>>41166719
Poor choice of knife, this thing is too sharp

>> No.41166846
File: 91 KB, 467x710, priest.jpg [View same] [iqdb] [saucenao] [google] [report]
41166846

Does this head look too big for this body?

>> No.41166867

Figured this would be the place if any to ask but, I'm trying to get back into modeling and I wanted to grab some stuff for some conversions from Zealot. Has anyone dealt with them and if so, do they ever really restock? I was in the mood to try my hand at modeling again a few months back but the pieces I wanted were out of stock and I came back to look and either they're out of stock again or they remained out of stock for the last 4 months or so.

>> No.41167103

>>41166846
it looks good to me

>> No.41167107

>>41166846

Looks pretty fine to me. If anything, might be too small.

>> No.41167117

>>41166846
Nö.

But it's too pretty for Warhammer. And female Warrior Priest do not exist.

>> No.41167205

>>41166624
What's up with those cadians? They converted 'nam marines or something? It looks good

>> No.41167264

>>41167205
Victoria Miniatures.
They kinda look like the old metal range from the Perrys.

>> No.41167558

Two basing questions

Are the GW technical bases any good?

Could you use clear dry glue for water effects?

>> No.41167655

>>41167558
You can use watered down PVA glue in super thin layers to get a water effect but it's infinitely more effort than you should be expending, easy to fuck up and not as versatile.

Just get some actual water effects or clear two part epoxy like araldite.

>> No.41167742
File: 56 KB, 800x600, vallejo texture paints unpainted.JPG.jpg [View same] [iqdb] [saucenao] [google] [report]
41167742

>>41167558
>Are the GW technical bases any good?
From what I hear yes, but they are basically just artists mediums in smaller repackaged form with a bigger price tag.
Vallejo also offers pretty much the same stuff cheaper.
>Could you use clear dry glue for water effects?
Most glues tend to yellow or dry foggy. Depends on what product specifically you mean. Some epoxys might work.
Could make a tester and let it sit in the sun for a year or two to be sure.

>> No.41168150

>>41160136
>>41160760

Very well done. This is the only model I've ever seen with realistic looking verdigris. It took me a long while to figure out that's what people were going for with all the blue/green splotches on their metal bits.
It really doesn't look good for the most part, but I think you nailed it pretty well.

>> No.41168188
File: 799 KB, 3850x2322, 1413777667310.jpg [View same] [iqdb] [saucenao] [google] [report]
41168188

>>41160845

YAY I love your shit I've got a folder with most of your Orks saved in it.

>> No.41168280
File: 82 KB, 590x575, aekold2.jpg [View same] [iqdb] [saucenao] [google] [report]
41168280

>>41160944

What's the plan for wet blending anon? Just highlights, or are you gonna have some color transitions in there?

>> No.41169714
File: 139 KB, 720x480, talos-in-jason-and-the-argonauts.jpg [View same] [iqdb] [saucenao] [google] [report]
41169714

>>41160760

GET OFF MY BEACH!

>> No.41170095

>>41168188

its things like this that really depress me that orks are hot garbage in the game now.

>> No.41170884
File: 542 KB, 1280x966, dg copy.png [View same] [iqdb] [saucenao] [google] [report]
41170884

>>41158171
some oc for all you dunc lovers out there

>> No.41170923

>>41170884
Kill yourself.

>> No.41170947

>>41170923
:^)?

>> No.41171226
File: 2.87 MB, 4608x3440, DSCF0052.JPG.jpg [View same] [iqdb] [saucenao] [google] [report]
41171226

How do I stop hatting everything I paint? No matter how well something I paint turns out I hate it.

>> No.41171283

>>41171226
You shouldn't stop hating your stuff because complacency leads to never bettering yourself.

>> No.41171406

>>41171226
Just look at everything you've completed as a step towards improving your painting.

Don't agonize over a finished paint job, just getting it done is an achievement, then you move on to the next piece having learned a little more.

>> No.41171636

>>41171226
>Pudge Pickers

Nice job.

also this >>41171406

>> No.41172137

I want to start building some terrain for my tau but im totally new to doing anything of the sort.
What tools are best to use when working with foam/polystyrene?

>> No.41172255

>>41172137
Get yourself a hot wire cutter.

>> No.41172349

How do I do flesh, /wip/. I tried doing a base of Ushabti Bone and then washing it with Reikland Fleshshade, but it looks like shit and it leaves me confused as how to highlight. I'm at a loss.

>> No.41172366
File: 1.41 MB, 1536x2560, PatriarchWIP6.jpg [View same] [iqdb] [saucenao] [google] [report]
41172366

Update on the Genestealer Patriarch - he now has all his arms! Sculpting on the upper arms is complete; the lower pair just need blending into the body. The legs are close to being done; I think the toes might need additional tendons to make them more genestealery, but they're close. After that, it'll just be the chest and back to do, and he'll be done!

Also included is a bonus Hybrid Acolyte, to lead a squad of Brood Brothers.

>> No.41172402
File: 1.38 MB, 2000x1124, Tsons15.jpg [View same] [iqdb] [saucenao] [google] [report]
41172402

>>41168280
Call it smooth highlights or colour transitions, i really dont think it's going to be a big difference. All i want is that sleak, somewhat distorted and clean look with an somewhat unworldly glow to it.

>> No.41172405
File: 336 KB, 1500x444, IMAG0837.jpg [View same] [iqdb] [saucenao] [google] [report]
41172405

>>41172349
>Rakarth flesh as base
>wash with Agrax Earthshade
>re-apply some Rakarth flesh, leaving the wash in the recesess
>highlight with pallid wych flesh

thats what I usually do

>> No.41172460

>>41172366
Holy crap man, you made some nice progress there. Really like the bulky, heavy look of the model without making it seem just fat and bloated. Great job!

>> No.41172464

>>41172405
khornate nemeroth?

>> No.41172465

>>41172366
Dad bod

>> No.41172481
File: 315 KB, 1500x1034, IMAG0883.jpg [View same] [iqdb] [saucenao] [google] [report]
41172481

Re-posting my finished Nid servo-skull. Gonna use it with a Magus that I plan to convert sometime in the future.
Critique is welcome.

>>41172366
Oh dude, that is amazing!
and please, would you share what parts you used for the cultist, It would really help me!

>> No.41172491

>>41172464
pretty much.

>> No.41172570

>>41172460

Thank you!

>>41172481

I'll trade you; here's the recipe for the cultist, and in return, I might steal your 'nid-servo-skull idea, depending on how big my cult gets (I've got ideas of doing a rogue Genetor of the AdMech who, in the course of his research into the Tyranids, has been splicing their DNA with humans' in ways that he shouldn't). The body is a normal Chaos Cultist's, with the head from the old Chaos Mutations Sprue. Most of my Brood Brothers have WHFB Ghoul heads, but this one had the big, bald, bulging look that I thought worked for a 'stealer Hybrid. His hand has been replaced with a 'stealer claw, and his third arm is a spare Ghoul arm; the lasgun, I think, came from an old Catachan sprue that I cleaned up and filed the aquila off.

>> No.41172691

>>41172570
>I'll trade you

excellent, thank you anon!
I sadly don't recall where the skull is from but the censer,claw and grabby-tentacle are all from the Mechanicus Tech-priest Dominus, cut off and glued to the underside. The cyber-eye is from a skitarii hood.

>> No.41172761
File: 659 KB, 1280x966, dunc.png [View same] [iqdb] [saucenao] [google] [report]
41172761

>>41170923
4u bb

>> No.41172848

>>41160845
>Literally throwing the Rokkits
I have found what I never knew I wanted for my Tankbusta conversion.

>> No.41172897

>>41172570
>>41172691
SM commander box has the tyranid skull in it as a basing accessory. There is also a similar one impaled on the chaos termie Lord's spines.

>> No.41172976
File: 24 KB, 369x488, Capture (2).JPG.jpg [View same] [iqdb] [saucenao] [google] [report]
41172976

>>41172761
thanks duncan

>> No.41173029

>>41161996

Quick rundown to make this easier on you

>you're priming black for bright colors, use grey instead
>you're basecoating purple then paint orange over it for some reason. It's probably easier to prime grey > get a few coats of orange on > use a purple wash such as druchii violet
>you appear to be painting with a pot of white that has gone bad. Get some matte medium and a toothpick. Add a LITTLE medium to the paint pot and stir that fucker up until it doesn't look like seagull poop
>your brush control seems good enough to be good at painting but by the looks of it, you're using a low quality brush. Invest in a better one.

If you want even more assurances for quick improvement, invest in a full spectrum daylight lamp so you can actually see which colors you're painting.

The order of operations is very important too. Fully assembling models like this makes it much harder to paint. GW guides will give you a pretty good idea on which order of paints/washes to use and what to paint first.

>> No.41173040

>>41162709

Aren't those just molding nubs?

>> No.41173068
File: 98 KB, 400x400, par400[1].jpg [View same] [iqdb] [saucenao] [google] [report]
41173068

>>41166796

Maybe don't grip the thing you're cutting like a banana

>> No.41173083

>>41171226

Buy cheap second hand beat up models to practice on? That's what I do. I often don't even clean the mold lines on those things if they're already primed

>> No.41173196

>>41161741
Not with this particular kit but from my (brief) experience of 1/35 + 40k I'd say prepare for things to not quite work out. A lot of things will be too large for Warhammer's scale and other things will look too spindly. But you might be better than me to make it work so best of luck.

>> No.41173286

>>41162957
That's a pretty big if.. as in, i'm not sure i have table space big enough to fit it all..

>> No.41173307

>>41158488

Just bought about 500 pts of Orks yesterday (muh AoS shirt), and they will be made into Waaaghala Orks, led by Warboss Immortar.

I'll update this coming week when I got some Warboys and Warpups (Gretchin) done.

>> No.41173516

>>41166624
Please say you're using those old cadians as your veterans...

>> No.41174039

>>41161018
space wolf berzerkers?

>> No.41174079

>>41162709
They're part of the molding process. You are supposed to cut them off.

>> No.41174097

>>41162402
>down down to goblin town

>> No.41174137

>>41163256
Oh man that sucks.

>> No.41174147

>>41160845
This is fabulous, anon

>> No.41174150

>>41167117
not your shot to call, m8

>> No.41174165
File: 1.02 MB, 1936x1936, image.jpg [View same] [iqdb] [saucenao] [google] [report]
41174165

This guy arrived in the post. I might switch his head, partially because I don't like it, secondly because he looks like has a dick on his forehead.

>> No.41174184
File: 221 KB, 600x891, 64591d214a62e10960a44d828c5e699f.gif [View same] [iqdb] [saucenao] [google] [report]
41174184

>>41174165
that's just the rune of nurgle, bro

>> No.41174186
File: 803 KB, 1936x1936, image.jpg [View same] [iqdb] [saucenao] [google] [report]
41174186

>>41174165

>> No.41174257

>>41174150
The thing about being too pretty is personal preference.
No female Warrior Priest is about as official as no female Space Marines though.

>> No.41174269
File: 45 KB, 420x247, image.jpg [View same] [iqdb] [saucenao] [google] [report]
41174269

>>41167117
What are Sisters of Sigmar?

>> No.41174282

>>41174257
>No female Warrior Priest is about as official as no female Space Marines though.
Really? I know they wiped out the SoS, but I didn't know they did the whole Catholic priest thing.
>Not that it matters since warrior priests also no longer exist

>> No.41174310

>>41160845
Truly spectacular anon.

>> No.41174342

>>41160845
Just so you know, I am copying thisshit for my next bloodbowl team. Which reminds me I should get some orcs soon just in case they discontinue them.

>> No.41174348

>>41174269
Pretty ugly from what I see.

>> No.41174378
File: 2.55 MB, 3264x2448, IMG-20150712-WA0006.jpg [View same] [iqdb] [saucenao] [google] [report]
41174378

>>41159386
Small progress update if anyone cares. Painted crew camo. Next is flesh or the bags and kit.

Based mini I is example of finished units

>> No.41174404

>>41172405
Hello again Nemeroth
Glad to see you made it there safely

>> No.41174446

>>41174269
Criminals by law. Which why you could also fight against Witch Hunters with them for example.
>>41174282

>but I didn't know they did the whole Catholic priest thing.
Not really the catholic church thing. It's just that Sigmar is a dude and the priest model themselves after him, using a hammer and whatnot.

There are also no female wizards, though that might just be because the Empire is basically Renaissance Germany.
I know you could play both female warrior priests and wizards in AoR, but that was only for the game and caused a little stir at the time.

>> No.41174448
File: 971 KB, 1936x1936, image.jpg [View same] [iqdb] [saucenao] [google] [report]
41174448

I am debating whether to change anything on him. The two points of contention are the head and the staff, any ideas? I also found this cute vulture to use as a familiar. I think it's from the screaming skull catapult.

>> No.41174458

>>41174446
That always bothered me. If they model themselves after Sigmar, why are they shaving their heads and wearing robes rather than growing long blond locks and running into battle near naked?

>> No.41174478

>>41174039
Fluff-wise they're actually white scars successors turned into bloodthristy space vikings.

>> No.41174497

>>41174448
Depends on what you want.
Raggedy-ass hood? More mutated head perhaps. A horn and a covered up eye to make him look a bit like a Plaguebearer.
Maybe add some extra bits and bobs to the staff, bones, severed limbs, more bells, skulls with maggots and flies on them? An impaled corpse with the mark of nurgle carved into it? Vulture perching on the staff?

>> No.41174499

>>41174458
Dunno. Shaved head looks more badass I guess.

>> No.41174602

>>41174446
>Not really the catholic church thing. It's just that Sigmar is a dude and the priest model themselves after him
Priests may only be men in the Catholic Church because they model the 12 disciples of Christ, who were all male.
>There are also no female wizards,
Forge world made a female wizard who is the best Grey (I think that's her lore. It's shadow or death) mage in the Empire.

I don't know, on the whole it seems silly. Especially the wizards thing. What with the Colleges coming from the HEs, whose most important leader is the Everqueen.

>> No.41174681
File: 133 KB, 800x505, DSC02758.JPG.jpg [View same] [iqdb] [saucenao] [google] [report]
41174681

>>41158553
Dirty dirty wip of sergeant... am i over doing the gold on him? Should I change the pauldrons to white perhaps?

>> No.41174837

>>41174681
I like the black and gold, but then again, i also play black legion, so perhaps i'm not the best guy to ask. White pauldrons wouldn't improve him imo, black and gold is the better contrast by far.

>> No.41174892

>>41166624
Hey if your still here man, could you post some photos of normal cadians by the arcadian models? Im seriously considering buying a few but already have 20 gw guardsmen, I would like to see them compared.

If you cant be fucked doing that then just describe them together, manly concerned about height.

>> No.41174941

>>41174892
Pretty sure they have a side by side comparison on their website.

>> No.41174999

>>41174941
Fool i am, you right sorry

>> No.41175088

So Im kinda stuck for how to base my new iron warriors army, standard grey just looks boring, and I dont like to use flock. Any suggestions? Really looking for different ways of painting gravel aside from grey that will compliment a dark silver and gold colour scheme.

>> No.41175210

Man it's depressing looking for cheap stuff on ebay and realising how much the price of stuff depreciates once it's assembled and painted

>> No.41175220 [DELETED] 

>>41174378
Bolt action or Flames of War? Almost certain it was BA but the paint pot in the back is throwing me off

>> No.41175231

>>41175210

Unless it's 'pro painted', and they put it on with only a 'buy it now' option. Then re-list it constantly because no one wants to buy it.

>> No.41175448

>paiting NMM on ork weapons and guns

good idea or not? also, anyone have examples of this done? I couldn't find one in google.

>> No.41175487
File: 916 KB, 1936x1936, image.jpg [View same] [iqdb] [saucenao] [google] [report]
41175487

Decided to keep it simple. Filed down and flattened the head symbol, sculpted a triad of welts/boils. I'm not a good sculptor but it should look fine when painted. Replaced the staff head with a hand from somewhere. Slightly inspired by a John Blanche chaos marine I saw years ago.

I would have had the familiar on his shoulder or staff or something, but in AoS familiars go on their own bases.

>> No.41175510
File: 441 KB, 1071x1117, ork nob.jpg [View same] [iqdb] [saucenao] [google] [report]
41175510

Actually managed to do some painting today for the first time in ages.

>> No.41175520
File: 933 KB, 1936x1936, image.jpg [View same] [iqdb] [saucenao] [google] [report]
41175520

>>41175487
His nose looks odd, slightly flat. I don't know if this is how the model is meant to look from the crappy pictures in the old catalogue, but I tried sculpting a more profound nose and just made it look worse.

>> No.41175541

>>41175448
Depends on what you want to achieve.

Orks typically look pretty good using the traditional method of bolt gun+washes.

>> No.41175542

>>41175520
I hate to say this, but the staff was my favorite thing about the mini.
The hand just looks really uninspired to me tbh.

>> No.41175559
File: 245 KB, 1600x680, image.jpg [View same] [iqdb] [saucenao] [google] [report]
41175559

>>41175542
Each to their own. This was my inspiration. I will think a bit more about it, I was clean with the cut so can replace the staff if I want to later.

>> No.41175613

>>41175559
Reminds me of the banner from the plastic zombie box too.

>> No.41175696

>>41175510
Job's a good un, boss

>> No.41175773
File: 31 KB, 558x499, 1409414404836.jpg [View same] [iqdb] [saucenao] [google] [report]
41175773

>Want all my soldier to look as if they're firing
>sprue comes with multiple retarded action poses which does no combat related action

>> No.41175788

>>41175773
What have you got a box of?

>> No.41175792

>>41175773
>want all my skeleton warriors to look monotome and identical, like they're mindless undead slaves with no personality

>5/16 leg bitz are fucking dancing

>> No.41175795

>>41175559
I think his conversion works better because the hand so grotesquely huge.
Makes you wonder where it came from.
The one on your model is just a hand.

Don't get me wrong, if you like it, keep it. Just trying to explain why I said I think it's uninspired before.

>> No.41175828

>>41175795
An old metal pink horror would be my guess on the hand.

>> No.41175937

>>41175510
Looks ded 'ard and ded killy

>> No.41175955

>>41175696
>>41175937
Cheers lads, think I over did it on the amount of bare metal on show though, bloody sigmarines must have subliminally influenced me.

>> No.41176084

>>41175788
Fire warriors has like 4/12 aiming poses only

>> No.41176121

>>41176084
>>41175773
>>41175792
Reposing joints, especially on legs, is not all that hard.

>> No.41176177
File: 479 KB, 1936x1936, image.jpg [View same] [iqdb] [saucenao] [google] [report]
41176177

If I am going to paint my blightkings armour like this, what colour should I be doing the skin? It can't be too light or striking, no idea what I should go for.

>> No.41176232

>>41176177
>It can't be too light or striking, no idea what I should go for.
You know what it looks like if the blood settles in a corpse where they lay for a while? Maybe kind of like that.

>> No.41176299

>>41176177
That's some fucking sick nurgle armour right there. Image search isn't helping, got a source my friend?

>> No.41176442

Hi WIP, I thought I ask before I purchase and shit.
Anyone tried to combine resin and metal parts in a miniature? Does it work? Was it hard to get the metal part from the metal miniature?
Does it worth it?

>> No.41176493
File: 738 KB, 1936x1936, image.jpg [View same] [iqdb] [saucenao] [google] [report]
41176493

>>41176299
I painted this bloke as a test for my new nurgle project.

>> No.41176527

>>41176493
that's probably the best nurgle armour I've ever seen, and the shield is perfect for it as well

any more?
also can you tell us how you painted it?

>> No.41176644

>>41174892
The victoria ones are a bit taller and skinnier. They are close enough though I can take a pic in a bit

>> No.41176682
File: 1.08 MB, 1936x1936, image.jpg [View same] [iqdb] [saucenao] [google] [report]
41176682

>>41176527
It was done with hairspray weathering. Basically, you start with a rust colour as your base, then give it two layers of hairspray over the top. Now airbrush the model whatever colour you want the armour, in my case rakarth flesh and add all shading etc. once you have finished this, take a stiff bristled brush or q tip and wet it, and you will be able to literally chip away at the armour colour and reveal the rust colour underneath. Once this was done I gave the entire armour a sepia wash before sealing it.

>> No.41176978
File: 1.11 MB, 534x1011, latest.png [View same] [iqdb] [saucenao] [google] [report]
41176978

Anyone know the proper image size when printing a space marine standard banner?

>> No.41177047
File: 11 KB, 400x218, Making_40k_Banners_2.jpg [View same] [iqdb] [saucenao] [google] [report]
41177047

>>41176978

>> No.41177068
File: 77 KB, 960x544, Cypher.jpg [View same] [iqdb] [saucenao] [google] [report]
41177068

For my first Warmachine army i tried to use lightning effects. As it is my first time painting these effects i think it turned out pretty well. Maybe dry brush a little with a lighter shade around the light since there is only one layer of paint around the source of the light.

>> No.41177097
File: 73 KB, 960x544, Cypher back.jpg [View same] [iqdb] [saucenao] [google] [report]
41177097

>>41177068

>> No.41177129

>>41177047
I meant in pixels.

>> No.41177245

>>41167117
Sisters of Sigmar yo

>> No.41177350

>>41176978
>>41177129
You know that the dpi depends on the resolution of your pic? If you just take a picture from the codex to print you'll just have use inches or mm to scale it appropriately. If you are not sure how much that has to be just measure the width of the banner you want to attach it to, to make sure it fits.

>> No.41177528
File: 700 KB, 782x565, lho-stick.png [View same] [iqdb] [saucenao] [google] [report]
41177528

>>41177129
Now Anon, don't be lazy. On the template, you have 68x130 (90 without straps), it may be the best size for a standard.

>> No.41177553

>>41177068

I'm gonna go for something like that for my army when i get around to actually buying shit. Any guide to how you did the blue glowy parts?

>> No.41177560

>>41177528
But how am i supposed to get>>41176978 to the right size?

>> No.41177653

>>41177560
If you are asking if you should resize the image as in making it smaller in pixels DO NOT DO THAT. That will only ruin the image quality and not affect how big you can print it.
Just use whatever program you are using to print it to change how big you're gonna print it. If you use PS or something like that you can arrange it on a preview page. If you use something like Illustrator or Inkshape you can also just change size on the page in mm via preview.

>> No.41177733
File: 23 KB, 67x130, Raukaan.png [View same] [iqdb] [saucenao] [google] [report]
41177733

>>41177560
FFS Anon

>> No.41177745
File: 2.39 MB, 3264x2448, greenskins.JPG.jpg [View same] [iqdb] [saucenao] [google] [report]
41177745

Long while back my brother and I split the cost of an Assault on Black Reach box, but never found the time to paint it.

I'm back from uni for a month, so I thought I'd finally get it finished.

Problem is, I've got no goddamned idea where to start. I've got brushes, paint, primer, and glue. I've never drawn or painted before, so I'm fairly intimidated by the prospect of a beginner like me making this not look like shit.

Should I file off the sprue leftovers or just paint over them? What do I do about the gaps between the arms and bodies they're socketed in to? What practice should I follow when gluing them together?

How do I remove dust from the small cracks? What do I do if I don't have all the paints used in the citadel guides?

>> No.41177872
File: 896 KB, 1936x1936, image.jpg [View same] [iqdb] [saucenao] [google] [report]
41177872

Decided to switch back to the original staff, but I slightly modified it by switching out the bell for a smaller, more defined one and cutting out the maggot so the bell looked more separate from the staff structure.

>> No.41177875

>>41177745
File off the leftovers, use liquid green stuff or modeling putty of some sort to fill in the gaps, and use small dabs of glue, don't gop it on

Remove dust by blowing, and mix paints if you don't have everything.

>> No.41177903

>>41172976
>>41172761
>>41170884

Has any anon here ever met Duncan? Does he make appearances at Warhammer World or do any kind of panels or anything?

>> No.41177933

>>41177745
With Orks they don't have to look good, just Orky

>> No.41178143

>>41177560

Maybe a bit of trial and error? What DPI is the printer you're using? What program are you printing from, and with what print settings? Printers print different, there is no 1-size fits all answer.

Do you want your ass wiped too?

>> No.41178193

>>41164809
>>41164852
>>41164885
finished painting the two marines and finished assembling the other 8 marines. Gonna prime and start painting tonight.

>> No.41178219
File: 4.07 MB, 5376x3024, IMAG0022.jpg [View same] [iqdb] [saucenao] [google] [report]
41178219

>>41178193
forgot pic

>> No.41178244
File: 3.18 MB, 5376x3024, IMAG0024.jpg [View same] [iqdb] [saucenao] [google] [report]
41178244

>>41178219

>> No.41178263

>>41177733
Man. You could print that, but it's gonna look like ass.

>> No.41178270

>>41177872
i think its too bad you took off the OG penis symbol. otherwise i like this

>> No.41178280

>>41178244

Did you leave your paint out to thicken in the sun and then apply it with your fingers?

The colour scheme looks alright but god damn thin your paints.

>> No.41178293

>>41177872
Looks good. Did you use liquid GS on the blade?
Sneaky.

>> No.41178373

>>41178293
Yeah it's good for texture if you stipple it

>> No.41178390

>>41178280
I have not painted in a loooooong time, it was my first attempt but thanks for the advice.

>> No.41178463
File: 2.66 MB, 2480x3508, Anon-affiches3.png [View same] [iqdb] [saucenao] [google] [report]
41178463

>>41178263
Of course it will, but Anon wanted it like that, so why bother.
It depends on what do you want to achieve. For posters, this process is a good way to have a lot of them ready with an acceptable quality (because they will not stand as much as a standard on a model but will give more depth on a terrain). I already did that for this.

>> No.41178648
File: 585 KB, 1462x2048, image.jpg [View same] [iqdb] [saucenao] [google] [report]
41178648

Hi, crappy weather today so chilled and finished off this terminator. I'm that guy who's posted a few blood angels before. Took 2-3 weeks off painting because it takes allot out of me. Hope you enjoy.

>> No.41178669

>>41178463
Eh. If you can print it so it's readable why not just do that instead of going potato?
But I guess most people don't even think about adding details like that.

>> No.41178724
File: 435 KB, 1536x1536, image.jpg [View same] [iqdb] [saucenao] [google] [report]
41178724

>>41178648
I normally avoid filters but just thought it looked really cool with a B&W filter. Almost like something out of a comic book.
>>41176493
Also this, this is awesome. Great job.

>> No.41178831

>>41162434
anyone?

>> No.41178834

>>41178669
Well, much of it readable (but as I wrote all of it I may be biased), the only concern I had when I printed it is that colors are less bright on the paper than on screen (but I assume that it's okay in a grimdark setting).

All consumables displayed are taken from the lore and they all are model-sized (apart for the Lho-Stick ones which are for big billboards like the ones on roofs and walls)

>> No.41178911

>>41177872
the new bell actually looks better Anon. but the recess between the two staff pieces seems quite big/unnatural.

>> No.41178928

>>41177903
I've been on one romantic evening with Dunc

>> No.41178952

>>41177872
>getting rid of the cocknballs nurgle symbol
Why?

>> No.41179026
File: 1.05 MB, 1920x1440, waagh!.jpg [View same] [iqdb] [saucenao] [google] [report]
41179026

>>41162957
I'm also doing Deffskulls, just diffrent approach.

>> No.41179403

>>41177903
How can we be sure Duncan is real?

>> No.41179470

>>41177903
They keep him chained up in the dungeons of GW HQ along side WFB, all the specialist games. He is fed on a diet of Agrax Earthshade.

>> No.41179498

>>41179470
Always keep your meals thin for the best result.

>> No.41179598
File: 315 KB, 772x1194, humiron_ready_for_battle.jpg [View same] [iqdb] [saucenao] [google] [report]
41179598

>>41178648
>Hi, crappy weather today so chilled and finished off this terminator. I'm that guy who's posted a few blood angels before. Took 2-3 weeks off painting because it takes allot out of me.

Hope your Blood Angels do better than mine. I got completely curbstomped at the tournament last weekend, but ... really, what can you expect of Space Marines up against armies with two Wraithknights or a Baneblade and a shit-ton of AV 14 tanks?

He looks pretty good, though.

>> No.41179813

>>41178648
Looks nice.

Not sure I approve of the gold crux terminatus though.

>> No.41179840

>>41179598

>2muchSherry4Santa.jpg

>> No.41179855

>>41179840
Does he get a WS penalty to avoid spilling it is what I always wonder.

>> No.41180515

>>41164063
>>41164063
it's part of the wolf guard set

>> No.41180554

>>41179813
Yeah I know what you mean, I did this with two of my early models ages ago and want to keep with the theme. Also it makes it look a bit more interesting with the colour variation. But yeah, slap on the wrist for not sticking with the rules.

>> No.41180565

>>41162769
not OP but I did it the same effect accidentally when my primer came out too thick. Just don't use water and you can achieve the look.

>> No.41180626

>>41180554
I meant it as a preference thing rather than a 'how dare you break the lore'. I should have just actually said that.

>> No.41180656
File: 1.68 MB, 2592x1936, image.jpg [View same] [iqdb] [saucenao] [google] [report]
41180656

Eldar Wave serpent, can I get some c&c?

>> No.41180679

>>41180656
Kill yourself for playing Eldar

>> No.41180691

>>41180656
Well, finish painting it would be my advice.

>> No.41180718
File: 46 KB, 1440x900, 1436141508322.jpg [View same] [iqdb] [saucenao] [google] [report]
41180718

>>41180656
Basecoat and white stuff. Cool.

>> No.41180732

>>41180679
I bought these guys like 3 years ago, im just getting back into the hobby now.

>>41180691
Yeah i probably should...

>> No.41180738

>>41171226
It looks kinda bland as is. Maybe with another round of edge highlights it would make it pop more.

>> No.41180794
File: 602 KB, 1920x1080, DSC_0469.jpg [View same] [iqdb] [saucenao] [google] [report]
41180794

More Blood Bowl!
This game is ruining my life.

Made some black orc blockers this weekend, probably going to make some spikes for their shoulder pads in the coming days.

>> No.41180804

>>41180732
Just trying to get my head around the blue primer and the white paint, what were you trying to achieve with it?

>> No.41180808
File: 1.04 MB, 2592x1936, image.jpg [View same] [iqdb] [saucenao] [google] [report]
41180808

Still going strong

>> No.41180813

>>41171226
stop painting eyes

>> No.41180848
File: 593 KB, 1920x1080, DSC_0472.jpg [View same] [iqdb] [saucenao] [google] [report]
41180848

>>41180794
And three of the four blitzers that will be accompanying them on the starting lineup. Just need a box of fantasy boys to finish the team.

>> No.41180855

>>41180804
It worked better on the infantry.

I had a can of army painter blue from a few years ago and didnt feel like buying a new one, but im realizing more and more i need to buy a white primer

>> No.41180866

>>41160845
do you gorkamorka?

>> No.41180903

>>41180855
Ah right, fair enough. A white primer would make your life a lot easier yeah.

>> No.41180935

>>41180808
i like your scheme, i hope you add checkers here and there after finishing basecoats

>> No.41180958

>>41180935
>checks
>not dags
https://www.youtube.com/watch?v=zH64dlgyydM

>> No.41180967
File: 416 KB, 2592x1456, 1.jpg [View same] [iqdb] [saucenao] [google] [report]
41180967

Working on some ZM-tiles made of cardboard. Half of a battlefield assembled.

>> No.41181038
File: 592 KB, 320x192, 1435784749754.gif [View same] [iqdb] [saucenao] [google] [report]
41181038

>mfw 3 Deathwing Command Squad boxes

All the leftover bits are killing me. There is enough shit in a single box to kit out 10+ terminators, but just 5 pairs of legs and 5 backplates.

>> No.41181101

>>41181038
i used the left over bits from my assault termies to make my Armageddon termies assault termies too

>> No.41181129

I'm going to pick up the AoS starter set for some stuff to paint and fantasy Blood Angels is my colour scheme of choice for the sigmarines.

But that leaves me wondering what I should do with the Khorne stuff. I don't think I've ever seen anything Khorne painted other than red and brass, is it going to trigger everyone who sees them if I go with an alternate scheme?

>> No.41181137

>>41181038
I remember seeing a video of a guy taking standard cheap AoBR termies and converting them into DW knights while also making a command squad.

>> No.41181184

>>41181038
Leftover bits are good in a way. The idea that you paid extra for them is what's annoying though.

Not sure how I feel about the trend towards fewer miniatures but more options in the boxes.

>> No.41181245

>>41181129

Paint them pink and yellow.

You know you want to.

>> No.41181320

>>41181245
Pink and yellow would suit the sigmarines more if I went down that path.

I was thinking black with bone trim perhaps.

>> No.41181327

>>41181129
white skin with blue armour, make it 30k in fantasy

>> No.41181400

>>41181327
A pre heresy World Easters scheme does appeal.

I'm not sure how well it transfers though, some of the models have a lot of skin and some a lot of armour, so some of them will look like Ultramarines.

>> No.41181412

>>41181137
Yeah that's what I'm doing now. I've still got some 30 old terminators from way back when I last played Space Marines during 2nd ed and from Space Hulk.

It's gonna take a lot of cutting and greenstuff to make them look vaguely dynamic and not like they are collectively taking a huge dump.

>> No.41181451

>>41181400
play it by ear, make it generally look like world eaters

>> No.41181480

>>41181412
I think that's why the guy chose to turn them into knights. The big shield hides most of the terrible pose and less detailed legs from the front.

>> No.41181490

>>41181451
Alright, that's the plan then.

I'll leave the uh, whatever the Chaos Marauders are called now until last.

>> No.41181583
File: 1.63 MB, 2592x1936, image.jpg [View same] [iqdb] [saucenao] [google] [report]
41181583

Update, I think it looks ok

>> No.41181709

>>41170095
Ditto, I've got more orks then I can count but I haven't won a game since 6th ed came out.

>> No.41181745

>>41181709
Well, look on the bright side, when we get Age of the Imperium you'll be able to just field them all and give yourself a fighting chance.

>> No.41181861

>>41181184
To be fair, the options are glorious.

3 heavy weapons
pair of claws
thunderhammer
5 stormbolters
5 powerfists
cyclone launcher
4 maces
a flail
5 stormshields
relic blade
halberd
apothecary bits

And that's just the weapons.

>> No.41181967

>>41181861
Oh yeah, it's the sort of thing I've wanted for ages.

I have the plastic nobs here and there's just so much stuff in the box. It's a step up from the days of having to do 30 conversions if you wanted spears because your models only came with swords.

>> No.41181992
File: 421 KB, 1296x728, boyz.jpg [View same] [iqdb] [saucenao] [google] [report]
41181992

Finally finished scrapping mouldlines on my AoBR boyz

>> No.41182018

>>41181992

They're rather horrifying without their heads.

Actually, I suspect that's true of most things.

>> No.41182125

>>41182018
The headless ones probably spray their sluggas around more accurately when in their death throes.

>> No.41182194

>>41182125
Can't imagine they'd have any ammo left by that stage though.

>> No.41182218
File: 43 KB, 600x620, starter set.jpg [View same] [iqdb] [saucenao] [google] [report]
41182218

I bought the Citadel starter set after having already bought a couple of brushes for getting into the hobby before hand, and I'm just wondering if anyone here knows what the best use for the "starter brush" that comes with the set is?

>> No.41182251

>>41182218
Same as any other brush.

What are those yellow things on the sheet.

>> No.41182309

>>41182251
I think that is just tuft

>> No.41182311

>>41182251
fake grass for the bases

>> No.41182313

>>41182251
Tufts of grass, for basing.

>> No.41182326

>>41182251
>What are those yellow things on the sheet.
Those are grass tufts for basing miniatures.

So I can use it for anything then? I just wondered if it was best for anything specifically.

>> No.41182331

>>41182218
Standard base coating and layering infantry. Not good for intricate stuff like eyes/lenses, not big enough for vehicles.

>>41182251
Grass tufts.

>> No.41182368

>>41182309
>>41182311
>>41182313
>>41182326
>>41182331
I literally could not work out what the fuck they were, I feel a bit silly now.

And to that guy I'd guess it's a size 1 brush maybe, good for base coats and layers.

>> No.41182403

>>41182368
>>41182331

Thanks Anons

I sat on my tufts so now I just have a bunch of tiny wigs for my Orks

>> No.41182486
File: 169 KB, 830x900, Grot.jpg [View same] [iqdb] [saucenao] [google] [report]
41182486

>>41181992
Did you make all of them wield choppas in their right hands on purpose?

I don't personally like that kind of standardization in Orks.

>> No.41182543

>>41182486
They're snap-fit, he didn't have a choice.

>> No.41182545
File: 2.03 MB, 3264x2448, lolorks.jpg [View same] [iqdb] [saucenao] [google] [report]
41182545

>>41182486
my 2nd ed Orks should trigger you then

>> No.41182546

>>41182486
Welcome to AoBR snapfit boyz.

>> No.41182604

Considering having Galg auxiliries for a Tau force, any idea of where I might be able to convert something into those frog people. Or would I like just have to completely model them?

>> No.41182635
File: 45 KB, 375x550, but why.jpg [View same] [iqdb] [saucenao] [google] [report]
41182635

>>41182545
>pic related
Those are some nice looking models though, I like classic Orks, though not as much as the new ones.

>> No.41182785

>>41182486
I wish I had more options to position their hands and bodies. Atm I feel super dissapointed when I'm looking at 8 orks with exactly same pose, just with diffrent choppas models. I hope that paintjob will differ dem more.

>> No.41182844
File: 266 KB, 800x830, Little buddy.jpg [View same] [iqdb] [saucenao] [google] [report]
41182844

Is the Citadel mold line remover and a decent hobby knife all I need to make my models look good out of the box or do I need to invest in some files?

Fuck getting the £15 ones from Citadel though

>> No.41182872

>>41181129
"The Harvest" from the khorne daemonkin book is cool imo. dark red with bone trim

>> No.41182887

>>41182844
You only need the knife really, for plastic anyway, I'd get some files for metal models.

>> No.41182934

>>41182872
Black or really dark red and bone was a thought.

It's what I'll default to if the white doesn't work out I think.

>> No.41182941

>>41182785
I'm sure a decent paint job will brighten up that pack Anon.

What kind of colours are you going for? The problem with that set up is that for varieties sake I wouldn't make them all one colour scheme.

>> No.41182959

>>41182887
Oh and some clippers are helpful.

>> No.41182964

>>41182785
If you buy a bitz box (sometimes people sell them on ebay) you'll for sure end up with enough extra arms to differentiate them. I like having boyz that have two sluggas or two choppas, and it's almost a requirement that you have the stikkbomb boy, one git that has the stormboy head with the stikkbomb in the mouth, an arm throwing a bomb, an arm holding extra bombs and a few extra bombs attached to his body.

>> No.41182988

>>41182844
>>41182887

I'm using my scalpel from medschool and the shitton of blades that kept accidentally falling into my pockets for everything. Just get a good, sharp knife and you're good.

>> No.41183010

>>41182964
Or if you ever plan to use shoota boyz buy a box now and use the extras.

>> No.41183050

>>41183010
Yeah that works too.

>> No.41183161
File: 80 KB, 440x400, 1433691184646.png [View same] [iqdb] [saucenao] [google] [report]
41183161

>>41175955
Naw boss, looks propa orky.

>> No.41183458
File: 681 KB, 2304x1728, 'Ard_boyz_comp.jpg [View same] [iqdb] [saucenao] [google] [report]
41183458

>>41182486
>>41182785
Yeah, AoBR boyz do look cloned as fuck straight out of the box. However, with a handful of spare bitz, patience and some kunnin' reposing you can get them to look unique enough. Pic related is all AoBR boyz, 3 different stock poses plus the nob. The simplest thing you can do is chop off the choppa hand at the wrist and turn it a bit and glue back (pinning recommended). Gives them a slashing/chopping look.

>> No.41183777

>>41183458
thanks for tip with hands, will give it a try before I undercoat them. I never used plasticard or GS before so no extra conversions for me this time.

>>41182941
I'm doing deathskulls orks, so I use blue, brown, and black for clothing. However, I like doing warpaints on faces and hands and paint checkers on weapons and shoulderpads so I should help me out a bit.

>> No.41183959
File: 134 KB, 960x540, 11720541_466141210234052_614253298_n.jpg [View same] [iqdb] [saucenao] [google] [report]
41183959

finished the two crusade squads

>> No.41183975

painting chaos backpacks... i hate!!!! the chunky ones without the pipes... so im cutting em up. they will look like imperial backpacks but a lil spiky... no doubt some brat in a store will tell me im using the wrong parts... then i will stare at the brat until it backs away...

>> No.41183987
File: 133 KB, 960x720, 11748568_466141296900710_763999031_n.jpg [View same] [iqdb] [saucenao] [google] [report]
41183987

>>41183959

>> No.41184027

>>41183987
mold lines on pistols and spure knubs here and there...

>my triggers!!!

>> No.41184051

>>41183975
You talk about brats - yet you post like a child.

>> No.41184065
File: 148 KB, 960x720, 11721872_466141310234042_247889919_n.jpg [View same] [iqdb] [saucenao] [google] [report]
41184065

>>41184027
damn you mold anon!!!!

>> No.41184254

>>41184051
words are not my best skill...

>> No.41184306

>>41184065

The snow basing kinda lets them down, what is that, baking soda?

>> No.41184392
File: 186 KB, 800x800, 1436113673218.jpg [View same] [iqdb] [saucenao] [google] [report]
41184392

I have a new nemesis.

Drilling Stormbolters!

Holy shit. I just did 15 and when I looked them over I saw at least 3 where I didn't manage to align the holes perfectly and now they are staring at me like demons of failure with Downs.

God fucking damn.

>> No.41184407

>>41184306
gw snow

>> No.41184427

>>41184407

Guess I won't be buying that to base my Soviets with then.

>> No.41184436

>>41184392
That's why you measure and mark - then check twice before you start drilling them

>> No.41184557
File: 1.47 MB, 4864x2736, IMG_20150709_224531.jpg [View same] [iqdb] [saucenao] [google] [report]
41184557

>>41182545
Treat 'em bettr!
>>41182635
I love 2nd Ed boyz!

>> No.41185261

>>41178193
>>41178219
>>41178244

>finished

You forgot to paint their right arms, anon

>> No.41185321
File: 94 KB, 1280x720, negaduncan.jpg [View same] [iqdb] [saucenao] [google] [report]
41185321

>>41178928
>>41179403
>>41179470

I love you /tg/

Could you clarify on that romantic evening

>> No.41185324
File: 358 KB, 1358x800, 100_2367.JPG.jpg [View same] [iqdb] [saucenao] [google] [report]
41185324

took a break from painting the carnosaur to put together some more dinosaurs

need to greenstuff the gaps and the bigass hole, but I'm looking forward to painting them after the carnosaur, the mounted version of the saurus hero, his throne and a block of 20 infantry

>> No.41185380

>>41180656

>ebay propainted/10

>> No.41185407

>>41180808

>dat huuuge fuckin gap running down the front and on the gun

c'mon anon, a mini like that you gotta put real effort into

>> No.41185439

>>41185407
They're doors man, it opens up. I don't see a line going down the gun.

>> No.41185474

how do i get my paints so smooth like duncan? he just takes them, adds a drop of water and there it is: a perfect thin layer of consistent paint. my paint just becomes a wash if i add more like one drop, and just one drop doesnt change shit. halp.

>> No.41185488

>>41185474
Try using medium instead. Remember that 2 thin layers are better than one thick one too.

t. Duncan cultist

>> No.41185657

>>41185488
yeah the thin layer stuff.. but his "thin layer" is just so consistent, i cant even.

>>
Name (leave empty)
Comment (leave empty)
Name
E-mail
Subject
Comment
Password [?]Password used for file deletion.
reCAPTCHA
Action