[ 3 / biz / cgl / ck / diy / fa / ic / jp / lit / sci / vr / vt ] [ index / top / reports ] [ become a patron ] [ status ]
2023-11: Warosu is now out of extended maintenance.

/diy/ - Do It Yourself

Search:


View post   

>> No.1792229 [View]

>>1791814
don't do it, whatever you're doing. extra battery is okay, but don't use solar panel not unless it's a camper.
you have 75amp alternator, and that's enough to full charge that 70AH battery within 10 minutes.

>> No.1792228 [View]

>>1791775
use a big threaded bolt. that one cannot do.
freeze the sleeve by spraying liquid nitrogen or freon, then pull it. by that way the metal contracts a little.

>> No.1791589 [View]

>>1789654
inverter got charger. for example the SNAT or SNADI brand. i have installed a lot of these inverters.
since it will be use only during blackout.

>> No.1791239 [View]

just fill it with hydraulic fluid, and pump it out.

>> No.1791238 [View]

whoever chips that from hammering, must be a very strong guy.

>> No.1791230 [View]

what do you plan to put on it? is that made of wood or metal?

>> No.1791227 [View]

put your bed underneath, and jump from it.

>> No.1789948 [View]

-flip it on one side.
-dig the hole beside it.
-fill the hole with water.
-flip it back in place.
-it will displace the water and will position itself into place.

>> No.1789919 [View]

>>1789918
Leeverite

>> No.1789915 [View]

magnetic or not?

>> No.1789900 [View]

there is no such thing as 2 ways. only 1 way and 3 ways.
yes, you can use the 3 way for 1 way.

>> No.1789896 [View]

>>1789467
it's been over sized to 0.50 before, then they oversize with 1.00 so it can go back to standard. the way it was honed was rough, maybe the piston ring available they got is 0.25 oversized.
have it pressed out, and slap in a standard sleeve. then return the rings to standard also.

>> No.1789892 [View]

that's not 40A. 40A is orange. that red is only 10A.
find a thhn wire awg10 and use the single strand as replacement.

>> No.1788593 [View]

vent pipe restricted.

>> No.1788592 [View]

that engine go bored oversize and pressed with cylinder lining. it was rebuilt.

>> No.1788589 [View]

good to go

>> No.1788577 [View]

dip in hot water.

>> No.1788573 [View]

that spoon can fit in your mouth? you got no teeth?
get a small knife and start carving it. it won't take a month to do one.

>> No.1788001 [View]

better do hydropressure on cooling system to confirm. the whitening of the piston head is a sign of coolant leak during intake stroke.

>> No.1787713 [View]

>>1787425
no from oil ring gap... the ring rotates because of the spring.
scoring is not a big deal, that hairline crack will suck coolant and compress it. it will bend your connecting rod once it''s filled and you restart the engine.

>> No.1787710 [View]
File: 30 KB, 300x300, sew-face-mask-12.jpg [View same] [iqdb] [saucenao] [google]
1787710

>> No.1787709 [View]
File: 25 KB, 300x300, sew-face-mask-8.jpg [View same] [iqdb] [saucenao] [google]
1787709

>> No.1787707 [View]
File: 21 KB, 300x300, sew-face-mask-1.jpg [View same] [iqdb] [saucenao] [google]
1787707

>> No.1787706 [View]
File: 66 KB, 600x600, face-mask-pattern-sketch.jpg [View same] [iqdb] [saucenao] [google]
1787706

For those who cannot buy anymore.

Navigation
View posts[+24][+48][+96]