[ 3 / biz / cgl / ck / diy / fa / ic / jp / lit / sci / vr / vt ] [ index / top / reports ] [ become a patron ] [ status ]
2023-11: Warosu is now out of extended maintenance.

/diy/ - Do It Yourself

View post   
File: 1.57 MB, 2448x3264, IMG_20131009_125350_899.jpg [View same] [iqdb] [saucenao] [google]
536238 No.536238[DELETED]  [Reply] [Original]

What type of bolt is this and how do I take it out? I've tried prying it out but I don't want to bend that metal sheet too much that it's attached too

>> No.536240

>>536238
That's a rivet. You need to grind off the top.

>> No.536242

>>536240
Alternatively, it can be drilled out too. Just use a diameter drill bit slightly larger than the hole in the middle.

>> No.536241

It's a rivet. You just drill it until the head pops off.

>> No.536265

On the top is a security hex screw.

>> No.536266

>>536265
The accurate term is pin-in-torx

>> No.536270
File: 302 KB, 1596x1192, HaIFixedIt.jpg [View same] [iqdb] [saucenao] [google]
536270

>>536265
Looks slotted to me.

>> No.536279

>>536266
I thought it was a hex not a torx... Looking again the picture isbso crappy it could just be another rivet.

>> No.536284

>>536279
It is the same thing as the one in >>536270