/diy/ - Do It Yourself

Hitting with a hammer.

>>2048808
What is the name of these mystery wrenches

>>2048804
google whats on the wrench retard.

>>2048810
see
>>2048808

>>2048810
Striking face spanner

>>2048804
Those are for manual calibration of fingerboxes. Before the development of autocalibration, people had to calibrate them by hand. It took several hours per fingerbox to get it properly calibrated.

Slugging wrenches
Used with a micro adjuster to loosen large nuts, or the battery cover on your mom's vibrator.

>>2048804
Closed end wrenches with a hammering end for loosening locked up bolts.

>>2048804
its an impact wrench (old school version)
you put the ring end on a bolt and give the solid end a h'whack with a finger finder

>>2048804
monkey wrenches

>>2048831
Doing by hand is still better. There's a sublime difference in a fingerbox tuned by a true master.

>>2048813
>>2048815
I already fucking did you fag

>>2048820
Thanks

>>2048820
Why would they use a 12-point box for hammering? It would strip the nut.

real answer for OP: they are fiberglass lug wrenches intended for connection nuts on electrical generators and similar, pic related

>>2048810
hammer wrenches

>>2049214
Nuts used to be made in USA.

>>2048831
>>2049035
you should seriously look into what the japanese are doing with fingerboxes these days, it's very exciting. calibration is going to be a thing of the past within ten years.

>>2048820
>spanners
eurocucks are not allowed to own tools legally. Please leave /diy/ you poser

>>2049225
>When we touch
>When we kiss

Slugger wrench. Used much less nowadays with battery impact guns but sometimes is the only option due to clearance. Normally a two person job With one guy holding a strap keeping it tight in the opposite direction or it goes flying after a few strikes