/diy/ - Do It Yourself

>>1756703
>>1756506
So I ended up buying it anyways, just because.

Got it in hand and aside from the incorrectly made tension system I mentioned before.
>mounting screws not long enough to mount on ender 3
I had some others from an old 3d printer so thats fine
>screws too long to install top plate
The threaded hole for the top plate are through holes. BUT for some reason right after the threads there is a small lip. You put the bolt in and it will hit the lip and not let it go further. And it stops the provided screws way before it can hold down the top plate, and it must have the top plate tight to function.
I used a 1/8 drill bit to drill out that lip from the bottom, and the long screws hold the top plate on fine now.