/diy/ - Do It Yourself

>>794903
>>794831
>>794727
>>794672

Did what you said guys, I only had to tightend the Yaxis belt, and now I had homogeneous circles, so Thanks!

So now I decided to print a new set of pieces for the printer, just in case some broke. Just to have spare parts even if they're in PLA its better than having a 500g paperweight.

But I couldnt finish the pieces, for the first one I left the printer for an hour and when I came back I found it with those extrange droplets of plastic, they were cold so I could remove them easily but it was extrange.

After that, the filament broke(I think that a spool support for the printer might not be so secondary as I first thought) and I didn't saw that so the extruder keeped doing layers without extruding and I had to restart.

But when I restarted happened something weird. The arduino overheated so much that the disipators became untouchable. And everything worked except for the bed, which I had to start preheating in steps(heat until 35Cº wait, for arduino to cool down and repeat unitl 45Cº, then wait for arduino again and get the 50Cº) but once the heatbed reached target temperature the problem just disapeared and the disipators became touchable.

And the other extrange things is that I have layers out of place, specially the first that seemed to be moved in the Y axis which I already tightened.

Thanks for the help provided guys.