/diy/ - Do It Yourself

>>1742618
It's the same on both pickups. It's an ibanez gio, value oriented model. Could this be the issue? I just redid most of the solder joints but the issue persists. The bridge wasn't grounded well, I was getting around 150 ohms but I scratched some paint off where the ground was making contact under it and now i'm getting 0.5 ohms. Also the pickups were wired from the factory as follow: The top one's signal was going to the switch and the ground to ground; The bottom one was reversed, the signal to ground blob on volume knob and the ground to the switch. The switch is already grounded. Why were they wired like this? I changed them so both the signals go into the switch.