/diy/ - Do It Yourself

Please help, I am retarded. I am attempting to reproduce a speaker amplifier but on a much smaller breadboard, for a personal project. Circuit diagram is in link.
http://afrotechmods.com/tutorials/2017/01/17/how-to-make-a-simple-1-watt-audio-amplifier-lm386-based/

I have everything wired up, but nothing seems to happen. When I hook up a phone or mp3 player to the circuit, nothing but silence. Nothing is overheating either, though. It's evident that I either have the wrong parts or have wired something up wrong. I have never done something like this before, and though I have a light understanding of how to wire stuff up, I'm a bit lost. Can anyone point out any errors that I may have performed, or if I used the wrong parts? I followed convention when soldering the speaker wires in, with red as positive and black as negative.

Parts List:

Amplifier
-https://www.digikey.com/product-detail/en/texas-instruments/LM386N-4-NOPB/296-43960-5-ND/148192

Wire
-https://www.digikey.com/product-detail/en/adafruit-industries-llc/288/1528-1750-ND/6226987

1k Ohm Resistors (x2)
-https://www.digikey.com/product-detail/en/stackpole-electronics-inc/CF14JT1K00/CF14JT1K00CT-ND/1830350

100mF Aluminum Capacitor (x2)
-https://www.digikey.com/product-detail/en/nichicon/UVZ1H101MPD1TD/493-13464-1-ND/4342175

1000 mF Aluminum Capacitor
-https://www.digikey.com/product-detail/en/panasonic-electronic-components/ECA-1EM102B/P10380TB-ND/268465

100nF(.1mF) Aluminum Capacitor
-https://www.digikey.com/product-detail/en/nichicon/UVR2A0R1MDD/493-1136-ND/588877

-9V Battery Holder
https://www.digikey.com/product-detail/en/mpd-memory-protection-devices/BS12I/BS12I-ND/32056

Breadboard
-https://www.digikey.com/product-detail/en/seeed-technology-co-ltd/319030004/1597-1264-ND/5488148

Jack
-https://www.digikey.com/product-detail/en/tensility-international-corp/CA-2208/CP-2208-ND/701169

Speaker
-https://www.digikey.com/product-detail/en/cui-inc/GF0771/GF0771-ND/304442

Thanks for any guidance.