/diy/ - Do It Yourself

>>1752684
>Could this be due to the thin, curved, tall part warping as it cools and changing the elevation of its top slightly?

Yes, that is exactly what it is.

>>1752690
>Yet Cura does not accept positive values as the X min and Y min, pic related. What does that mean

Could be nothing, could be that cura is made by gays that just flipped the values for whatever reason as they raped the rest of cura after the 4.0 update. Try adding a custom FFF printer and set it up to match those values.

>>1752714
>Could it be possible that the first Cura .gcode did something to the printer that broke it?

Really really unlikely. Your problems are probably from poor assembly and some setting not being right somewhere. Did you set up your extruder for the correct nozzle size and filament?

My current recommendation is to just decrease your flow setting by 20% and see if over extrusion is your problem. The flow setting is hidden by default, you need to enable it under configure cura.