/diy/ - Do It Yourself

>>1771077
>>1771397
Ok, here's my report on my stringing adventure.
1 is cura 185 6@25 (temp retract distance@retract speed). Probably the second worst overall, very fine hair stringing.
2 is cura 210 - 5@45. This is the worst, with some oozing towards the top.
3 is cura 185 - 5@45. Dropping temps fixed the oozing, but stringing is still bad.
4 is creality slicer stock settings. 0 stringing until halfway up. At this point I find a video by makers muse, using a stringing test that's larger and has 0 stringing.
5 is that stringing test with creality slicer, 0 stringing, a perfect print.
6 is 185 6@80. I notice retract speed is 80 in creality slicer, so I try that. Helps a reasonable bit, but still no dice.
7 is the magic setting, retracting at layer change too. 200 6@80. Stringing fixed using cura.
Only thing now is the flat surface of 7 is much rougher than 5, and has some white lines. Anyone have any idea?
/blog